Free help & advice Learn more

A Proud Australian Company Learn more

AUSLOCK Battery Draining Too Fast (Fix High Drain

Mergim Hoxha |

Why AUSLOCK batteries can drain quickly

Fast battery drain is usually caused by motor strain or too many lock cycles—not a “bad lock”. Start with the mechanical checks first.

Most common causes

  • Door misalignment: latch/deadbolt rubbing on the strike plate
  • Door not closing cleanly: auto-lock attempts multiple times
  • High traffic use: many daily openings
  • Low-quality or mixed batteries
  • Cold/heat exposure or outdoor moisture

Fix checklist (in order)

  1. Replace all batteries with fresh, matching brand-name batteries.
  2. Test locking with the door open (should be smooth).
  3. If smooth open but not closed: adjust the strike plate so the latch/deadbolt slides freely.
  4. Reduce auto-lock attempts (set a sensible delay) and re-test.
  5. Check for binding weather seals or door sag.

Quick test

Lock/unlock 10 times with the door open. If it sounds strained or inconsistent, fix alignment before relying on it.

Need help? Send a short video of the latch/strike area and we’ll guide you.

Contact Support


← Back to Troubleshooting | Help Centre

Leave a comment