Why Do I Need Multiple Presses to Wake My AUSLOCK Keypad?
Mergim Hoxha |
This is usually caused by battery voltage, touch sensitivity, or environmental conditions.
Try these fixes in order
-
Replace batteries: Low batteries can cause delayed wake.
-
Dry/clean keypad: Wipe with a microfiber cloth.
-
Wake method: Tap once firmly, then enter code after the keypad lights/sounds.
-
Restart: Remove batteries for 30 seconds, reinstall fresh batteries, re-test.
If it continues
- Check for water exposure or heavy condensation (outdoor doors).
- Contact AUSLOCK Support with a short video of the issue.
